Car Transporter Trailer
Introduction
If you need to move your classic car, stock or race car, tractor, farming equipment or agricultural machinery, you can't go past the Trailersauce Car Transporter trailer for strength, versatility, ease of use and smooth, well balanced towing.
With its tilting deck, hinging ramps and drawbar mounted winch, loading and unloading of vehicles or machinery is a breeze. Securing the load is quick and easy with heavy duty tie rails extending from the front of the trailer all the way down each side.
With a standard GVM of 2500kg with hydraulic override brakes, fitting 4 wheel electric brakes (including a few structural modifications) will increase the trailers capacity up to a total of 3500kg GVM. The tare weight of the trailer is approximately 680kg.
Deck size is 4.25 x 1.95m and can be fitted with steel, alloy or timber decking, depending on its end requirement. The 500mm wide ramps are 900mm high and will allow almost any vehicle to run on and off the trailer without bottoming out or damaging valuable trims.
Running 14" tyres, and oscillating load sharing suspension, the car transporter trailer will tow your pride and joy effortlessly, smoothly and safely.
The following design will enable most competent welders/engineers to quickly fabricate the trailer with easy to follow, step by step instruction.